AR RMW Series "Ready To Go" Pump 7/8 Inch Vertical Gas Engine Shaft

AR RMW Residential Series Vertical Pump. "Ready To Go" axial pressure wash pump assembly.

Replacement pump fits most 4 to 7 hp engines with a 7/8" inch vertical shaft - *see notes below for choosing correct model*

Choose model to match current pump being replaced or optimum performance will not be achieved.

Models Available

• RMW2G25 - 2gpm, 2500psi - 5hp
• RMW22G24 - 2.2gpm, 2400psi - 5.5hp
• RMW22G24-SX - 2.2gpm, 2400psi - 5.5hp (rear facing inlet/outlet)
• RMW25G25 - 2.5gpm, 2500psi - 6.5hp
• RMW25G28 - 2.5gpm, 2800psi - 7hp
• RMW25G28-SX - 2.5gpm, 2800psi - 7hp (rear facing inlet/outlet)

Complete pump assembly.

All pump are rated for 140° F max temperature, include a standard 3/4" garden hose inlet and a 22mm threaded outlet for twist connect hoses.

"Ready To Go" pumps are ready to bolt onto the engine and work.

Professional installation is recommended.

*Notes for choosing correct model

If you are looking to replace with the identical pump you need to observe the position of the hole in the arm.

AR does not mark the difference on the pump other than this hole.

In general the EZ will replace the forward facing pumps (towards engine spark plug) and the EZ-SX will replace the rear facing pump.

• If the hole is on the arm nearest the pump inlet you have the EZ-SX pump.
• If the hole is on the arm opposite the pump outlet near the brass unloader valve you have the EZ pump.
• This pump does not fit Karcher units using a hex head bolt to drive the pump.